萝莉社

Quality and Reliability Engineering, Statistical Process Control, Economic Modeling, Economics of Quality, Precision Measurements, Rapid Prototyping and Manufacturing of Composites.

Books/Book chapters:

• Elshennawy A. K., and Weheba G. S 鈥淢anufacturing Processes & Materials,鈥� 5th ed., Society of Manufacturing Engineers, Dearborn, Michigan (2015).
• Weheba G., 鈥淨uality Systems Development, Implementation, and Verification,鈥� Certified Quality Engineer Handbook, Second edition, Chapter 3, Quality Press, (2001).

Refereed articles in international journals: (Student coauthors identified with *)

• Al Turk, A* and Weheba G., Restoring Historical Buildings Using Additive Manufacturing, Journal of Management and Engineering Integration, Vol. 17, No. 1, pp 35-44, Summer 2024.
• Jaradat, B* and Weheba G., A Practical Guide to ISO25022: Measurement of Software Quality in Use, Journal of Management and Engineering Integration, Vol. 17, No. 1, pp 45-52, Summer 2024.
• Mohammad Kanan1, Ayman Zerban, Salah Abunar, Ameen El Harbi, and Gamal Weheba, Online Education and Managing Service Quality with the Challenges of COVID 19: The Case of University of Business and Technology (UBT) Saudi Arabia, Appl. Math. Inf. Sci. 17, No. 2, pp. 201-207, 2023.
• Matthew T. Guile* and Gamal Weheba., Implementation and Evaluation of Curved Layer Fused Deposition Modeling, Journal of Management and Engineering Integration, Vol. 16, No. 2, pp 14-22, Winter 2023.
• Al Turk, A* and Weheba G., Key Barriers to Industry 4.0 in Construction Industry, Journal of Management and Engineering Integration, Vol. 15, No. 2, pp 26-33, Winter 2022.
• Al Turk, A* and Weheba G., 3D Printing of Portland Cement Using a Binder Jetting System, Journal of Management and Engineering Integration, Vol. 14, No. 1, pp 128-136, Summer 2021.
• Sari Almutairi* and Gamal Weheba, 鈥淔actors Correlating with Revisions of the ISO9001 Quality Management Standard,鈥� Journal of Management and Engineering Integration Vol. 11, No. 2, pp 25-36, Winter 2019.
• Abdelhakim Al Turk*, and Gamal Weheba, 鈥淎pplications of Additive Manufacturing in Construction Industry: A Literature Review, The Journal of Management and Engineering Integration Vol. 13, No. 1, pp 32-39, Summer 2020.
• Abdulaziz G. Abdulaziz* and Gamal S. Weheba, 鈥淧erformance Characterization of 饾懣虆 Group Control Charts, The Journal of Management and Engineering Integration Vol. 13, No. 2, pp 8-14, Winter 2020.
• Weheba, G., Cure, L., & Toy, S. (2018). Perceived dimensions of healthcare quality in published research. International Journal of Healthcare Management, 13(sup1), 357鈥�364. https://doi.org/10.1080/20479700.2018.1548156.
• Mugharbil* H., and Weheba G., 鈥淒rivers for Innovation in Small and Medium-Sized Enterprises鈥� Journal of Organisational Studies and Innovation, Vol.5, No. 2, pp. 1-13, 2017.
• Kanan* M, Weheba G, Assaf R., 鈥淓conomic Advantages of Utilizing the Integrated Quality Software Development Model,鈥� Industrial Engineering and Management, Vol. 6, No. 1, 2017, doi:10.4172/2169-0316.1000210.
• Alghamdi* F., and Weheba G., 鈥淓conomic Approach for Determining the Time Buffer in Synchronous Manufacturing,鈥� The Journal of Management and Engineering Integration, Vol. 9, No. 2, pp. 40-50, 2016.
• Attar* M., and Weheba G., 鈥淎 Framework for Discovering Customer Requirements,鈥� The
  Journal of Management and Engineering Integration, Vol. 9, No. 2, pp. 62-70, 2016.
• Alotaibi* F., Weheba G. and Toy S., 鈥淨uality in Higher Education: Perceptions of Top Administrators,鈥� The Journal of Management and Engineering Integration, Vol. 9, No. 2, pp. 51-61, 2016.
• Jaradat* B. and Weheba G., 鈥淐ost of poor software quality: A literature Review,鈥� Journal of Management and Engineering Integration, Vol. 8, No. 1, pp. 41-48, 2015.
• M. Attar* and G. Weheba., 鈥淒ynamic Validation of satisfaction surveys,鈥� Journal of Management and Engineering Integration, Vol. 8, No. 1, pp. 57-65, 2015.
• Algamdi* F. and Weheba G., 鈥淎pplication of the Simplified Drum Buffer Rope in an Assembly Plant,鈥� Journal of Management and Engineering Integration, Vol. 8, No. 1, pp. 1-8, 2015.
• Kanan* M., and Weheba G., 鈥淒evelopment of the Audit-Calc Software System: A Case Study,鈥� Journal of Management and Engineering Integration, Vol. 7, No. 1, pp. 1-11, 2014.
• Weheba G., and Wuay* C.S., 鈥淚mproving Dimensional Accuracy of Water-jet Machining,鈥�
  Journal of Management and Engineering Integration, Vol. 5, No. 2, pp. 108-115, 2012.
• Begum* S., and Weheba G., 鈥淪tatistical Techniques for Analyzing Customer Feedback,鈥�
  Journal of Management and Engineering Integration, Vol. 4, No.2, pp.129-134, 2011.
• Safaie* N., and Weheba G., 鈥淎 Fully Bayesian Approach to Verifying a Shift in the Process Average,鈥� Journal of Management and Engineering Integration, Vol. 4, No.1, pp.129-136, 2011.
  Weheba G., and Khalidi* S., 鈥淓conomic Feasibility of Utilizing Multivariate Control Charts,鈥� Journal of Management and Engineering Integration, Vol. 1, No. 2, pp.114- 118, 2009.
• Weheba G., Tola* A., and Masud A., 鈥淓conomics of Quality Improvement in Manufacturing Processes based on Attributes,鈥� Journal of Management & Engineering Integration, Vol. 1, No. 2, pp. 15-20, 2008.
• Weheba G., and Minhas* V.,鈥� Ruggedness Evaluation of the Open-Hole Test Procedure,鈥�
  Journal of Management and Engineering Integration, Vol. 1, No. 1, pp. 100-106, 2008.
• Weheba G., Mahmassani* A., and Malzahn D., 鈥淎S9100 Registration Difficulties and Organizational Benefits: A Supplier Satisfaction Survey,鈥� SAE International Transactions, Journal of Aerospace 01-2438, 2007
• Samarah* I., Weheba G. and Lacy T., 鈥淐haracterization of the Effect of Material Configuration and Impact Parameters on Damage Tolerance of Sandwich Composites,鈥� SAE International Transactions, Journal of Aerospace, 01-2443, 2007.
• Self T., Scudder R., Weheba G., and Crumrine* D., 鈥淎 Virtual Approach to Teaching Safety Skills to Children with Autism Spectrum Disorder,鈥� Topics in Language Disorders, Language, and Learning, Vol. 27, No. 3, pp. 242-253, 2007.
• Weheba G. and Sanchez* M. A., 鈥淯sing Response Surface Methodology to Optimize the Stereolithography Process,鈥� Rapid Prototyping Journal, Vol. 12, No. 2, pp. 72-77, 2006.
• Samarah* I., Weheba G., and Lacy T., 鈥淩esponse Surface Characterization of the Mechanical Behavior of Impact-Damaged Sandwich Composites,鈥� International Journal of Applied Statistics, Vol. 33, No. 4, pp. 427-437, 2006.
• Cheraghi S.H., Liu* W., and Weheba G.,鈥� An Examination of the Effect of Variation in Datum Targets on Part Acceptance,鈥� International Journal of Machine Tools and Manufacture, Vol. 45, pp. 1037-1046, 2005.
• Weheba G., and Elshennawy A., 鈥淎 Revised Model for the Cost of Quality,鈥� International Journal of Quality & Reliability Management, Vol. 21, No. 3, pp. 291-308, 2004.
• Whitman L., Malzahn D., Madhavan V., Weheba G., and Krishnan K., 鈥淰irtual Reality Case Study Throughout the Curriculum to Address Competency Gap,鈥� International Journal of Engineering Education, Vol. 20, No. 5, pp. 690-702, 2004.
• Weheba G., and Nickerson D., 鈥淭he Economic Design of x-bar Charts: A Proactive Approach,鈥� Quality & Reliability Engineering International, Vol. 21, pp. 1-14, 2004.

Refereed conference proceedings:

• Ribas, C* and Weheba G., Control Limits for Monitoring the Average of Correlated Streams, Proceedings of the 6th International Conference on Quality Engineering and Management, pp. 798-813, 2024.
• Mohammed Al Awadh*, Gamal Weheba, and Deepak Gupta, 鈥淨uality in E-learning: Perceptions of Instructors鈥�, IMES 2020 Conference Proceedings pp 5-13.
• Mohammed Al Awadh* and Gamal Weheba, 鈥淭op Administrators鈥� Perceptions of Quality in E-learning,鈥� ASEE 2019 Conference Proceedings pp 120-131.
• Miller, L., and Weheba G., 鈥淎pplication of Rapid Prototyping to Support Treatment of Lobule Keloids鈥� Proceedings of the 18th International ICE Conference on Engineering, Technology and Innovation, 2012.
• Weheba G., Sheikh-Ahmad J., and Tandon S., 鈥淩apid Construction of EDM Electrodes Using Stereolithography,鈥� Proceedings of the Industrial Engineering Research Conference, 2005.
• Mohamed T., Weheba G., and Masud A., 鈥淓conomic Design of R-Control Charts: A Proactive Approach,鈥� Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2005, pp. 447-452.
• Patel D., Sathaye M., and Weheba G., 鈥淪ix-Sigma in Small Organizations: A Case Study,鈥� Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2005, pp. 488-495.
• Khalidi S., Weheba G., and Jorgensen M., 鈥淨uality and Ergonomics: An Interactive Relationship,鈥� Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2005, pp. 252-261.
• Weheba G., and Mohamed T., 鈥淓conomic Design of Control Charts: A Review of Recent Developments,鈥� Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2004, pp. 429-437.
• Voth D., and Weheba G., 鈥淧artner Selection Methodology for an Agile Supply Chain,鈥� Proceedings of the International Conference on Information Systems in Engineering and Construction, 2004.
• Deligiannidis L., Weheba G., and Self T., "Utilizing Virtual Reality for Autism Treatment," Proceedings of the International Conference on Imaging, Science and Technology (CISST), 2004, pp. 248-253.
• Jithavech I., and Weheba G., 鈥淧erformance Characterization of the Stereolithography Process,鈥� Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2004, pp. 418-423.
• Khalidi S., and Weheba G., 鈥淕uidelines for Implementing Multivariate Quality Control Charts,鈥� Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2004, pp. 424-428.
• Deshpande S., and Weheba G., 鈥淎pplication of SPC in Stereolithography, Proceedings of the International Conference on Industry, Engineering and Management Systems, 2003.

Conference presentations:

• Abdelhakim Al Turk, and Gamal Weheba, Binder Jetting Cementitious Materials and Quality of Printed Objects, International Conference on Industry, Engineering and Management Systems, March 6, 2023.
• Clovis S. Ribas* (P) & Gamal Weheba, Self-starting Q-chart for controlling a multi-stream process - a case study, International Conference on Industry, Engineering and Management Systems, March 14, 2022.
• Matthew Guile* and Gamal Weheba, 鈥淚mplementation and Evaluation of Curved Layer Fused Deposition Modeling鈥�, International Conference on Industry, Engineering and Management Systems, March 15, 2021.
• Zohreh Lamei*, Gamal Weheba and Sue Abdinnour, 鈥淐omprehensive Cost Model of Additive Manufacturing鈥�, International Conference on Industry, Engineering and Management Systems, March 15, 2021.
• Zoherh Lamie* and Gmal Weheba, 鈥淐ost Models of Additive Manufacturing: An Overview, presented at the 26th Annual Conference on Industry, Engineering and Management Systems, March 2020.
• Khunza Meraj* and Gamal Weheba, 鈥淒eveloping a 3D Printable Thermoplastic Elastomer鈥�, presented at the 26th Annual Conference on Industry, Engineering and Management Systems, March 2020.
• Weheba G., and Esfandiarpour Borujeni E. B., 鈥淩epeatability and Reproducibility Study of a Portable Coordinate Measuring Machine鈥� the 24th annual conference on Industry, Engineering and Management Systems, March 2018.
• Weheba G., 鈥淎 Pilot Implementation of the Drum-Buffer-Rope and Reported Benefits鈥� the 24th annual conference on Industry, Engineering and Management Systems, March 2018.
• Weheba G., 鈥淎 Usability Assessment of Statistical Analysis Software Package,鈥� the International Conference on Industry, Engineering and Management Systems, March 2017.
• Weheba G., 鈥淚nnovation Management in Small Business: Best Practices,鈥� International conference on Industry, Engineering and Management Systems, March 2016.
• Weheba G., 鈥淚ntegration of the Drum-Buffer-Rope and Manufacturing Resource Planning: A Case Study,鈥� 21st International Conference on Industry, Engineering and Management Systems, March 2015.
• Weheba G., and Jaradat* B., 鈥淐ost of Software Quality,鈥� 20th International Conference on Industry, Engineering and Management Systems, March 2014.
• Safai* N., and Weheba G., 鈥淎 Fully Bayesian Approach to Verifying a Reduction in the Process Variance,鈥� The International Conference on Industry, Engineering, and Management Systems, March 2012.
• Weheba G., and Pandiripalli B., 鈥淩epeatability and Reproducibility Studies: A Comparison of Techniques,鈥� the International Conference on Industry, Engineering and Management Systems, March 2011.
• Weheba G., and Safaie* N., 鈥淩ecent Developments in Bayesian Process Monitoring Techniques: A Literature Review,鈥� International Conference on Management of Technology, April 2009.
• Weheba G., 鈥淎dvances in Rapid Tooling for Composite Manufacturing,鈥� International Conference on Management of Technology, May 2007.

萝莉社 University, Wichita, KS

Professor                                                                                                             2012-Present

Associate Professor                                                                                          2005-2012

Assistant Professor                                                                                           2000-2005

Department of Industrial, Systems & Manufacturing Engineering

• Teaching Quality Engineering, Statistical Quality Control, Design of Experiments, Reliability Engineering, Rapid Prototyping and Engineering Economy.

University of Central Florida, Orlando, FL

Visiting Professor                                                                                               1997-1999

Department of Industrial Engineering and Management Systems

• Taught Engineering Statistics, Operations Research, Quality Engineering, Precision Engineering and Engineering Economy at the graduate and undergraduate levels including Honor, Media Assisted and Interactive Television classes.

Research Associate                                                                                            1997-1999

Reverse Engineering and Rapid Prototyping Research Project

• Work with teams of clients to identify rapid prototyping needs and design precision measurement techniques and 3D scanning processes.

Menoufia University, Egypt

Assistant Professor                                                                                            1996-1997

Department of Production Engineering and Mechanical Design

• Taught Quality Control, Industrial Statistics, Manufacturing Technology, Operations Research and Precision Measurement.

University of Central Florida, Orlando, FL

Instructor                                                                                                             1992-1996

Department of Industrial Engineering and Management Systems

• Taught Probability and Statistics, Engineering Economics, and Manufacturing

Research Assistant                                                                                             1991-1992

NASA Productivity Improvement Project

• Developed key design components that include ergonomic principles to reduce Orbiter Turnaround Time and improve workplace design.

Menoufia University, Egypt

Instructor                                                                                                               1981-1991

Department of Production Engineering and Mechanical Design

• Taught Industrial Statistics, Manufacturing Processes, and Measurement

• Alumni of the Year, Department of Industrial Engineering and Management Systems, University of Central Florida, Orlando, FL, 2019
• Academy of Effective Teaching Award, 萝莉社 University, 2013
• Polished Professor Award, College of Engineering, 萝莉社 University, 2010
• Fellow of the American Society for Quality, 2008
• Leadership in the Advancement of Teaching Award, 萝莉社 University, 2007-2008
• Dwane and Velma Wallace Outstanding Teaching Award, 萝莉社 University, 2008
• Polished Professor Award, College of Engineering, 萝莉社 University, 2008
• Boeing Fellow, College of Engineering, 萝莉社 University, 2005-2006
• Polished Professor Award, College of Engineering, 萝莉社 University, April 2006
• Dwane and Velma Wallace Outstanding Educator Award, 萝莉社 University, 2002-2003
• Polished Professor Award, College of Engineering, 萝莉社 University, April 2002

• Human-Agent Teaming for the Future of Work in Aircraft Manufacturing, NSF, 1/01/222 鈥� 12/31/2022, $149,965 (Co-PI)
• Rapid Prototyping Laboratory, College of Engineering, Equipment acquisition proposals,
  $45,000, 2019 (PI)
• Additive Manufacturing Assistantship Grant, AMETEK, $25,000, 2019 (PI)
• Audit-Calc: A software for Audit Day Calculation According to the 9104-001 Aerospace Standard, International Aerospace Quality Group (IAQG), $120,000, 2012-2017, (PI)
• Performance Assessment Observation and Analysis, Bombardier Aerospace, Learjet,
  $69,000, Jan 2007 鈥揗ay 2010, (PI)
• Modeling and Evaluation of Plant Layout Design, Bombardier Aerospace, Learjet,
  $23,144, August-Dec., 2008, (Co-PI)
• Rapid Fabrication of Composite Lay-up Tools, Aircraft Design and Manufacturing Research Center (ADMRC), $103,643, 2004-2006, (PI)
• Achieving NADCAP Requirements Using Six Sigma Methodology, Chrome Plus International, $2,112, September-December 2006, (PI)
• Reverse Engineering as a Tool for Process Planning, R&R Precision Machine, $3,000, June 鈥揂ugust 2006, (PI)
• Performance Analyses Using Work Sampling Techniques, Bombardier Aerospace Learjet, $41,544, 2005-2006, (PI)
• AS9100 Registration Difficulties and Organizational Benefits: A Customer Satisfaction Survey, Cessna Aircraft, $4,000, February-May 2005, (PI)
• Innovation in Aircraft Manufacturing through System-Wide Virtual Reality Models and Curriculum Integration,鈥� NSF partnerships for Innovation, $597,810, 2002-2004, (Co-PI)
  Use of Virtual Reality to Enhance Speech and Skill Development, Multidisciplinary Research, Office of Research Administration, $5000, 2003, (PI)
• Solid-imaging System, Office of Research Administration, 萝莉社, $103,000, 2002 (PI)

• Conference chair, International Conference on Industry, Engineering and Management Systems (2019-present)
• Program coordinator, Additive Manufacturing graduate certificate Program, Wichita State University, (2019-present)
• Graduate Faculty Scholar, College of Graduate Studies, University of Central Florida Appointed (2013-present)
• Member of the editorial board, Journal of Management and Engineering Integration (2008-present)
• Track chair and member of the advisory committee, Annual Conference of the International Association for Management of Technology (2008- present)
• Track chair and session organizer, General Aviation Technology Conference, SAE International (2006)
• Session organizer and Chair, National Student Paper Competition, American Society for Quality, World Conference (2005-2006)
• Member, Coalition for the Advancement of Careers in Health Care, Wichita Chamber of Commerce (2004-2005)
• Examiner and team leader, State Quality Award Program, Kansas Award for Excellence (2003- 2005)
• Reviewer, Computers and Industrial Engineering Journal (2000-2005)
• Member, AS9108 Quality Standard, Statistical Product Acceptance Requirements Team, the International Aerospace Quality Group (2002-2003)
• Reviewer, Operations Research and Service Enterprise Engineering Program, the National Science Foundation (2002)

• Certified Quality Engineer (CQE), ASQ Certification # 32273 (1994-present)
• Founding Faculty Advisor, 萝莉社-ASQ Student Branch, 2001-present
• Faculty Advisor, 萝莉社-Saudi Students Association (SSA), 2010-present
• Member and Faculty Advisor, Society of Manufacturing Engineers (SME) 2005-2007
• Member of the Board of Examiners, Kansas Award for Excellence Foundation 2003-2005
• Member of the American Society for Engineering Education (ASEE) 2004-2005
• Member, Alpha Pi Mu, Industrial Engineering Honor Society, University of Central Florida